652-A
652-A

HydraRester™

Arresters

  • Certified by the American Society of Sanitary Engineering to the ANSI/ASSE 1010-2004 Standard
  • Lifetime cycle tested at U.S. Testing Laboratories to withstand 10,000 shock cycles. Factory tested to withstand 500,000 cycles without failure (654-C tested)
  • HydraRester™ male sweat fittings are compatible with press-fitting systems, such as Viega ProPress™ and all push-fitting systems
  • Allows for installation in 2 × 4 wall cavity
  • Installs at any angle
  • ASSE 1010 certified as a water hammer arrester that is “designed to provide continuous protection, without maintenance” allowing the HydraRester to be installed without access panels

  • 652-A
    652-A
  • 653-B
    653-B
  • 654-C
    654-C
  • 655-D
    655-D
  • 652-AS
    652-AS
  • 653-BS
    653-BS
  • 654-CS
    654-CS
Item No Conn. Size Unit Size Length Width Fixture Unit Value No Lead Pkg Min Qty Case Qty
MIP THREAD
652-A ½" A 6 ½" 1 ⅜" 1–11 YES B 1 16
653-B ¾" B 8 ¾" 1 ⅜" 12–32 YES B 1 16
654-C 1" C 11" 1 ⅜" 33–60 YES B 1 16
655-D 1" D 10 ⅛" 2 ⅛" 61–113 YES B 1 4
656-E 1" E 12 ⅝" 2 ⅛" 114–154 YES B 1 4
657-F 1" F 15 ⅛" 2 ⅛" 155–330 YES B 1 4
MALE SWEAT/PRESS FITTING
652-AS ½" A 8 ¼" 1 ⅜" 1–11 YES B 1 16
653-BS ¾" B 10" 1 ⅜" 12–32 YES B 1 16
654-CS 1" C 12 ½" 1 ⅜" 33–60 YES B 1 16
CPVC SOCKET ASTM D 2846
652-AC ½" A 7½" 1⅜" 1–11 YES B 1 16
653-BC ¾" B 9½" 1⅜" 12–32 YES B 1 16
654-CC 1" C 12" 1⅜" 33–60 YES B 1 16
PEX CRIMP ASTM F1807
652-AX ½" A 6½" 1⅜" 1–11 YES B 1 16
653-BX ¾" B 8¾" 1⅜" 12–32 YES B 1 16
654-CX 1" C 11" 1⅜" 33–60 YES B 1 16
PEX EXPANSION ASTM F1960
652-AWG ½" A 6 ½" 1 ⅜" 1–11 YES B 1 16
653-BWG ¾" B 8¾" 1 ⅜" 12–32 YES B 1 16
654-CWG 1" C 11" 1 ⅜" 33–60 YES B 1 16

  • Packaging:
  • B = Bulk
  • C = Cut Case
  • D = Dispenser Box
  • T = Tube
  • I = Individually Bar-Coded